Skip to main content
Need Help? Experts Available 1-888-887-6872

What are the different product conditions?

New
Brand new items. Full manufacturer warranty available. Equipment provided in manufacturer's packaging with all accessories and documentation.
New From Surplus Stock
Equipment is unused. Packaging and accessories as indicated in Stock Item Description.
Used and in Excellent Condition
Equipment is in average to above average physical condition with normal wear as indicated in Stock Item Description.
Used and in Good Condition
Equipment is in average physical condition with signs of moderate wear as indicated in Stock Item Description.
Used and in Fair Condition
Equipment is in below average physical condition and shows significant wear as indicated in Stock Item Description.
Parts Grade / As-Is
Equipment may be missing parts required to function and potential for major cosmetic damage, condition unknown, or as specified in Stock Item Description.

National Instruments / nuLogic 2SX-411 nuDrive Power Amplifier

National Instruments / nuLogic 2SX-411 nuDrive Power Amplifier

National Instruments / nuLogic 2SX-411 nuDrive Power Amplifier

Model#: 2SX-411
Stock #:
55087-22

Expedite Available
Availability: Contact Us

Item Details & Specifications

Configuration:

• Number of Axes: 2
• Motor Type: Stepper (2-Phase)
• Motion Board Cable Connector: 50-pin
• Driver/Amplifier Nominal Bus Voltage: 40 VDC Bus
• Driver/Amplifier Type: Microstepping Driver IM483
• AC Input: 115V (50/60 Hz) 65444 4SX-411, 2SX-411, 4SX-211, 2SX-211, 4CX-001, 2CX-001, 4CF-001, 2CF-001

Product Family Overview

National Instruments / nuLogic nuDrive Power Amplifiers

Features
  • 2 or 4 Axis
  • Uses PWM Amplifiers
  • Stepper and DC Brush Servo Drivers
  • 115V AC Input

Description

The National Instruments / nuLogic nuDrive Power Amplifier is a complete power amplifier and system interface for use with up to four axes of simultaneous or independent servo or stepper motion control. Ideally suited to industrial and laboratory applications, the nuDrive has everything needed to connect motors, encoders, limit switches, I/O, and other motion hardware to National Instruments motion controllers.

The nuDrive can drive a broad range of servo or stepper motors. Servo nuDrives use pulse-width modulation (PWM) amplifiers with a user-specified peak output current rating and a DC bus voltage to drive servo motors. Stepper nuDrives use a rugged microstepping bipolar chopper driver. Stepper driver configurations are available in a wide range of user-specified current per phase and voltage settings to drive stepper motors. In all configurations, power supplies are built in and use standard 115 VAC for operation. Electronics are fan cooled to assure reliable operation.

nuDrives simplify field wiring through separate encoder, limit switch, and motor power removable screw terminal connector blocks for each axis. The terminal blocks do not require any special wiring tools for installation.

Additional Photos

National Instruments / nuLogic 2SX-411 nuDrive Power Amplifier


Disclaimer

  • Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above Item Details & Specifications section and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.