Skip to main content
Need Help? Experts Available 1-888-887-6872

What are the different product conditions?

New
Brand new items. Full manufacturer warranty available. Equipment provided in manufacturer's packaging with all accessories and documentation.
New From Surplus Stock
Equipment is unused. Packaging and accessories as indicated in Stock Item Description.
Used and in Excellent Condition
Equipment is in average to above average physical condition with normal wear as indicated in Stock Item Description.
Used and in Good Condition
Equipment is in average physical condition with signs of moderate wear as indicated in Stock Item Description.
Used and in Fair Condition
Equipment is in below average physical condition and shows significant wear as indicated in Stock Item Description.
Parts Grade / As-Is
Equipment may be missing parts required to function and potential for major cosmetic damage, condition unknown, or as specified in Stock Item Description.

National Instruments / nuLogic PCI-FlexMotion-6C Universal Motion Interface

National Instruments / nuLogic PCI-FlexMotion-6C Universal Motion Interface

National Instruments / nuLogic PCI-FlexMotion-6C Universal Motion Interface

Model#: PCI-FlexMotion-6C
Stock #:
55906-7

Expedite Available
Availability: Contact Us

Item Details & Specifications

This National Instruments / nuLogic PC-FlexMotion Universal Motion Interface is used and in excellent condition.

Model: PC-FlexMotion
Part Number: 184973C-01

Resistor Networks Installed:
RP3 and RP10: 2.2 kOhm (Factory Default)
RP6, RP8, RP11, RP13, RP15: 1.5/3.3 kOhm

If a different resistor network configuration is required, please contact Artisan Technology Group Sales for pricing and availability. 55906 PCI-FlexMotion-6C, PCI FlexMotion 6C, PCIFlexMotion6C, FlexMotion-6C, FlexMotion6C, FlexMotion 6C, UMI-Flex6, UMIFlex6, UMI Flex6, UMI-Flex-6, UMIFlex-6, UMI Flex-6, UMI-Flex 6, UMIFlex 6, UMI Flex 6

Product Family Overview

National Instruments / nuLogic FlexMotion Series Universal Motion Interfaces

Features
  • Host Bus +5 VDC Monitor With Built-In Driver Inhibit Control
  • Built-In Inhibit Logic
  • Connects National Instruments 100-pin Controllers to Third-Party Power Drives
  • Per-Axis Motion Signal Breakout
  • Pluggable Terminal Blocks

Description

The National Instruments / nuLogic UMIs (universal motion interfaces) provide a comprehensive wiring and connection point for motion control and feedback signals. A single cable from the motion controller to the UMI carries input and output signals for all axes. By breaking out these signals into per-axis and function-specific pluggable connections, the UMI-4A simplifies integration of third-party drivers, amplifiers, encoders, limits, and I/O with our 100-pin FlexMotion controllers (PC-FlexMotion-6C and PCI-FlexMotion-6C). Requires external 5 V power supply.

Additional Photos

National Instruments / nuLogic PCI-FlexMotion-6C Universal Motion Interface


Disclaimer

  • Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above Item Details & Specifications section and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.