Skip to main content
Need Help? Experts Available 1-888-887-6872

What are the different product conditions?

New
Brand new items. Full manufacturer warranty available. Equipment provided in manufacturer's packaging with all accessories and documentation.
New From Surplus Stock
Equipment is unused. Packaging and accessories as indicated in Stock Item Description.
Used and in Excellent Condition
Equipment is in average to above average physical condition with normal wear as indicated in Stock Item Description.
Used and in Good Condition
Equipment is in average physical condition with signs of moderate wear as indicated in Stock Item Description.
Used and in Fair Condition
Equipment is in below average physical condition and shows significant wear as indicated in Stock Item Description.
Parts Grade / As-Is
Equipment may be missing parts required to function and potential for major cosmetic damage, condition unknown, or as specified in Stock Item Description.

Dymax Light-Welder PC-3D Medium Intensity UV Spot Lamp

Dymax Light-Welder PC-3D Medium Intensity UV Spot Lamp

Dymax Light-Welder PC-3D Medium Intensity UV Spot Lamp

Model#: Light-Welder PC-3D
Stock #:
63887-4

Expedite Available
Availability: Contact Us

Item Details & Specifications

This unit's UV bulb is used. This unit does not include the syringe caddy; however, this will not prevent it from functioning properly.

The PC-3D spot-light dispenser combination allows a single operator to dispense and cure adhesive.

Lamp Part Number: 35003 (120 VAC)

Configuration:
• Accepts Standard 10 and 30 cc Syringes
• Dispenser Timer Range: .5 to 3 Seconds
• Manual or Timed Modes Provided for Shutter and Adhesive Dispensing
• Adjustable Vacuum Draw Back
• 0 to 120 psi Pressure Regulator with Dial Gauge
• Output Power: 50 Watt
• Intensity in the UVA Range (320 - 390 nm): Up to 2,000 mW/cm²
• Dimensions of Illuminated Area: Up to 50" in diameter
• Foot Switch Included
• Fiber Optical Cable Sold Separately

63887 PC-3, PC-3D, PC 3, PC 3D, PC3, PC3D

Product Family Overview

Dymax Light-Welder PC-3 / PC-3D Medium Intensity UV Spot Lamp

Features
  • Wand Lamp/Dispenser Combinations
  • Up to 2,000 mW/² Intensity
  • 2,3, or 4 Split Wand Configurations

Description

The Light-Welder PC-3 is a medium intensity UV/visible light curing lamp used for pinpoint curing of UV adhesives, coatings and potting materials. Light is generated by the lamp in the housing and transmitted through a flexible liquid lightguide that emits a 5 mm diameter spot of UV/visible light for precise curing. The lightguide can be hand-held for complete mobility or clamped into position on assembly equipment or work stations for repetitive operations. The PC-3 is ideal for wire tacking, coil terminating, shallow potting and disk drive applications for the electronics, aerospace and medical device assembly industries. The lamp is user friendly, easy to operate and cost effective.

The PC-3 consists of a housing containing a 50 watt power supply, circuit protection, lamp/reflector assembly, cooling fan, lightguide mount, non-resetable hour meter and shutter system. Electric shutters are supplied with timed and manual shutter operating modes. The lightguide is separate and plugs into the mount. Light is not emitted from the unit when the light guide is removed. A separate filter mounts on the output end of the light guide to reduce visible light output where desired. Lamps are rated at 500 hours of life, however, a useful life of 1,000 hours can be expected for most applications.

Additional Photos

Dymax Light-Welder PC-3D Medium Intensity UV Spot Lamp
Dymax Light-Welder PC-3D Medium Intensity UV Spot Lamp
Dymax Light-Welder PC-3D Medium Intensity UV Spot Lamp
Dymax Light-Welder PC-3D Medium Intensity UV Spot Lamp


Disclaimer

  • Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above Item Details & Specifications section and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.