Skip to main content
Need Help? Experts Available 1-888-887-6872

What are the different product conditions?

New
Brand new items. Full manufacturer warranty available. Equipment provided in manufacturer's packaging with all accessories and documentation.
New From Surplus Stock
Equipment is unused. Packaging and accessories as indicated in Stock Item Description.
Used and in Excellent Condition
Equipment is in average to above average physical condition with normal wear as indicated in Stock Item Description.
Used and in Good Condition
Equipment is in average physical condition with signs of moderate wear as indicated in Stock Item Description.
Used and in Fair Condition
Equipment is in below average physical condition and shows significant wear as indicated in Stock Item Description.
Parts Grade / As-Is
Equipment may be missing parts required to function and potential for major cosmetic damage, condition unknown, or as specified in Stock Item Description.

Pilz PMCprimo Drive2.03/21/2/230-480V Motion Control Drive

Pilz PMCprimo Drive2.03/21/2/230-480V Motion Control Drive

Pilz PMCprimo Drive2.03/21/2/230-480V Motion Control Drive

Model#: PMCprimo Drive2.03/21/2/230-480V
Stock #:
99431-1

Expedite Available
Availability: Contact Us

Item Details & Specifications

This unit is missing the X10 connector; however, this does not affect its ability to function properly.

Configuration:
• Current: 3A
• Bus System: With Expansion Board

Part Number: 8168830 99431 PMCprimo Drive2, PMCprimo-Drive2, PMCprimoDrive2

Product Family Overview

Pilz PMCprimo Drive2 Series Motion Control Drives

Features
  • Position Controller with 1 ms Cycle Time
  • Digital Current Controller (Space Vector, Pulse-Width Modulation, 62.5 µs)
  • Evaluation of the Resolver Signals or Sine-Cosine Signals of a HIPERFACE Encoder
  • (9) Axes in System: (1) Motor Direct, as well as (8) Other Axes Channels for Controlling Further Axes
  • Each Axis can Operate in Virtual Motor Mode
  • Tension Control

Description

The Pilz PMCprimo Drive2 Series Motion Control Drives are position controllers with a one ms cycle time featuring digital current controller (space vector, pulse-width modulation, 62.5 µs). The Drive2 Series can also evaluation the resolver signals or sine-cosine signals of a HIPERFACE encoder. The PMCprimo Series offers nine axes in system with one being motor direct, as well as eight other axes channels for controlling further axes with each axis capable of operating in virtual motor mode. The series also has tension control.

Additional Photos

Pilz PMCprimo Drive2.03/21/2/230-480V Motion Control Drive
Pilz PMCprimo Drive2.03/21/2/230-480V Motion Control Drive
Pilz PMCprimo Drive2.03/21/2/230-480V Motion Control Drive
Pilz PMCprimo Drive2.03/21/2/230-480V Motion Control Drive
Pilz PMCprimo Drive2.03/21/2/230-480V Motion Control Drive
Pilz PMCprimo Drive2.03/21/2/230-480V Motion Control Drive


Disclaimer

  • Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above Item Details & Specifications section and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.