Skip to main content
Need Help? Experts Available 1-888-887-6872

What are the different product conditions?

New
Brand new items. Full manufacturer warranty available. Equipment provided in manufacturer's packaging with all accessories and documentation.
New From Surplus Stock
Equipment is unused. Packaging and accessories as indicated in Stock Item Description.
Used and in Excellent Condition
Equipment is in average to above average physical condition with normal wear as indicated in Stock Item Description.
Used and in Good Condition
Equipment is in average physical condition with signs of moderate wear as indicated in Stock Item Description.
Used and in Fair Condition
Equipment is in below average physical condition and shows significant wear as indicated in Stock Item Description.
Parts Grade / As-Is
Equipment may be missing parts required to function and potential for major cosmetic damage, condition unknown, or as specified in Stock Item Description.

VIAVI Solutions / JDSU TB9126+22SC1 Tunable Grating Filter

VIAVI Solutions / JDSU TB9126+22SC1 Tunable Grating Filter

VIAVI Solutions / JDSU TB9126+22SC1 Tunable Grating Filter

Model#: TB9126+22SC1
Stock #:
51959-7

Expedite Available
Availability: Contact Us

Item Details & Specifications

This JDSU TB9126 Tunable Grating Filter is used, and in excellent condition.

Instrument Configuration (TB9126+22SC1):
SC/PC Bulkhead Optical Connectors on Front
Tuning Range: 1500-1620 nm
Insertion loss: Less than 3.0 dB
0.55 nm @ -3dB bandwidth
1.5 nm @ -20dB bandwidth
51959

Product Family Overview

VIAVI Solutions / JDSU TB9 Tunable Grating Filter

Features
  • Tuning Range from 1525-1625 nm
  • Single-Mode Fiber In and Out
  • Grating-based Optical Filter
  • High Rejection
  • GPIB and RS232 Remote Control

Description

The JDSU Tunable Grating Filter is designed for high performance laboratory and production testing of single-mode fiber-based components and subsystems. It features fine adjustment with resolution of 0.01 nm. The filter attains much higher wavelength isolation roll-off than Fabry-Perot etalons or interference filters.

The filter can be used for amplified spontaneous emission (ASE) filtering in erbium-doped fiber amplifier (EDFA) applications or to remove spontaneous emission from distributed feedback lasers (DFBs) and tunable lasers in measurements of wavelength selective components.

The Tunable Grating Filters can be controlled from the front panel keypad or by the GPIB and RS232 interfaces.
These units require a warm-up time of 1 hour to perform within specifications.

Additional Photos

VIAVI Solutions / JDSU TB9126+22SC1 Tunable Grating Filter


Disclaimer

  • Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above Item Details & Specifications section and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.