Skip to main content
Need Help? Experts Available 1-888-887-6872

What are the different product conditions?

New
Brand new items. Full manufacturer warranty available. Equipment provided in manufacturer's packaging with all accessories and documentation.
New From Surplus Stock
Equipment is unused. Packaging and accessories as indicated in Stock Item Description.
Used and in Excellent Condition
Equipment is in average to above average physical condition with normal wear as indicated in Stock Item Description.
Used and in Good Condition
Equipment is in average physical condition with signs of moderate wear as indicated in Stock Item Description.
Used and in Fair Condition
Equipment is in below average physical condition and shows significant wear as indicated in Stock Item Description.
Parts Grade / As-Is
Equipment may be missing parts required to function and potential for major cosmetic damage, condition unknown, or as specified in Stock Item Description.

RTD Embedded Technologies AD2110 Industrial Control Board

RTD Embedded Technologies AD2110 Industrial Control Board

RTD Embedded Technologies AD2110 Industrial Control Board

Model#: AD2110
Stock #:
76958-1

Expedite Available
Availability: Contact Us

Item Details & Specifications

This RTD Embedded Technologies AD2110 Industrial Control Board is used and in excellent condition.

Part Number: 602425 76958 AD2110, ADA2110, AD-2110, ADA-2110, AD 2110, ADA 2110

Product Family Overview

RTD Embedded Technologies AD2110 / ADA2110 Industrial Control Boards

Features
  • 16 Single-Ended or 8 Differential Analog Input Channels
  • 12-Bit, 20 Microsecond Analog-to-Digital Converter with 40 kHz Throughput
  • ±5, ±10, or 0 to +10 Volt Input Range
  • Programmable Gains of 1, 2, 4 & 8 with Onboard Gain Multiplier
  • 16 TTL/CMOS 8255-Based Digital I/O Lines Which can be Configured with Pull-Up or Pull-Down Resistors
  • Three 16-Bit Timer / Counters
  • Two 12-Bit Digital-to-Analog Output Channels (ADA2110 Only)
  • ±5, ±10, 0 to +5, or 0 to +10 Volt Analog Output Range (ADA2110 Only)

Description

The RTD Embedded Technologies AD2110 / ADA2110 Industrial Control Boards turn your IBM PC/XT/AT or compatible into a high-performance data acquisition and control system. Theses units are installed within a single short or full size expansion slot in the computer.

The (A/D) circuitry receives up to 16 single-ended or 8 differential analog inputs and converts these inputs into 12-bit digital data words which can then be read and/or transferred to PC memory. The analog input voltage range is jumper-selectable for bipolar ranges of -5 to +5 volts or -10 to +10 volts, or a unipolar range of 0 to +10 volts. The board is factory set for -5 to +5 volts. Overvoltage protection to ±35 volts is provided at the inputs. The high-performance A/D converter supports fast-settling, software programmable gains of 1, 2, 4, and 8 with on-board gain multiplier circuitry so that you can customize the input gain. A/D conversions are performed by an industry standard successive approximation converter. The converter and high-speed sample-and-hold amplifier before it combine to provide a maximum throughput rate of 40 kHz. The converted data is read and/or transferred to PC memory, one byte at a time, through the PC data bus.

Additional Photos

RTD Embedded Technologies AD2110 Industrial Control Board


Disclaimer

  • Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above Item Details & Specifications section and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.