Skip to main content
Need Help? Experts Available 1-888-887-6872

What are the different product conditions?

New
Brand new items. Full manufacturer warranty available. Equipment provided in manufacturer's packaging with all accessories and documentation.
New From Surplus Stock
Equipment is unused. Packaging and accessories as indicated in Stock Item Description.
Used and in Excellent Condition
Equipment is in average to above average physical condition with normal wear as indicated in Stock Item Description.
Used and in Good Condition
Equipment is in average physical condition with signs of moderate wear as indicated in Stock Item Description.
Used and in Fair Condition
Equipment is in below average physical condition and shows significant wear as indicated in Stock Item Description.
Parts Grade / As-Is
Equipment may be missing parts required to function and potential for major cosmetic damage, condition unknown, or as specified in Stock Item Description.

Elma / Bustronic 101V64XM05-0621 Backplane with COTS-Tech Chassis and Power Supply

Elma / Bustronic 101V64XM05-0621 Backplane with COTS-Tech Chassis and Power Supply

Elma / Bustronic 101V64XM05-0621 Backplane with COTS-Tech Chassis and Power Supply

Model#: 101V64XM05-0621
Stock #:
81890-1

Expedite Available
Availability: Contact Us

Item Details & Specifications

This Elma / Bustronic 101V64XM05-0621 Backplane with COTS-Tech Chassis and Power Supply (Part Number 111-00043-350-64X-05) is used and in excellent condition.

Configuration:
• Product: V64x with Electronic Daisy Chain
• Form: 6U
• Slots: 5
• Power Interface: 10 Pin Power Tap with 6/32 Screw
• J1 Connectors and Shrouds: 160 Pin, 5mm without Shrouds, All Slots
• J2 Connectors and Shrouds: 160 Pin, 13mm with Shrouds, All Slots
• J0 Connector and Shrouds: 95 Pin (19 x 7 Position 17mm with Shrouds)

Input Power: 85-264VAC

81890 VME64x, 101V64XM05, 1O1V64XMO5, VME64

Product Family Overview

Elma / Bustronic VME64x Backplane

Features
  • 10-Layer Controlled Impedance Stripline Design
  • Active BUSGRANT, IACK Daisy Chain
  • Power Connections at Bottom for Easier Cabling
  • Superior Power Distribution
  • Virtually Zero Crosstalk
  • Backplane Stiffeners to Provide Durability, Reliability

Description

The Elma / Bustronic VME64x Backplane is designed to fully comply with the ANSI/VITA VME extension standard. The backplanes provide all standard features required for VME64x compatibility, including 160-pin VME extension connectors in J1 and J2, all defined ground pins connected to a ground plane, routing and termination of all VME and VME64x bussed signal lines, geographic address pins, distribution of +5V, +3.3V, ±12V, ±V1, ± V2, and VPC, all on a single monolithic printed circuit board with J1 and J2 included. Additional features include active, electronic IACK/BUSGRANT daisy chaining standard; onboard, inboard termination; distributed high frequency capacitors for each slot, distributed low frequency capacitors; five signal layers, five power and ground planes.

Elma / Bustronic constructs the board in ten layers — five signal layers, five power and ground planes. The backplanes incorporate a full stripline design, generously distributed decoupling capacitors, inboard termination, 2 oz. power and ground planes, transient analysis simulation programs.

The standard design features three 2 oz. copper ground planes, which fully shield the backplane, minimize EMI/RFI emissions susceptibility, minimize crosstalk, and maximize power distribution. In addition, the robust outer ground layers provide mechanical and EMI/RFI protection for the backplane.

Two 2 oz. copper VCC planes, allow the backplanes to maximize power distribution while they act as virtual ground planes for the signals in order to minimize noise and crosstalk. The high frequency decoupling capacitors at every slot and distributed low frequency electrolytic capacitors across the board also help this effort. Measured results verify that Elma / Bustronic backplanes are among the quietest in the industry.

The combination of multiple 2 oz. copper layers of VCC and ground, plus the distributed capacitors allows Elma / Bustronic backplanes to provide superior power distribution. Additionally, there are multiple, well-distributed power bugs to virtually eliminate voltage drop across the backplane. There is also a utility connector that allows minimal power insertion and provides access to status signals, including ACFAIL, RESET, and SYSFAIL.

Additional Photos

Elma / Bustronic 101V64XM05-0621 Backplane with COTS-Tech Chassis and Power Supply
Elma / Bustronic 101V64XM05-0621 Backplane with COTS-Tech Chassis and Power Supply
Elma / Bustronic 101V64XM05-0621 Backplane with COTS-Tech Chassis and Power Supply
Elma / Bustronic 101V64XM05-0621 Backplane with COTS-Tech Chassis and Power Supply


Disclaimer

  • Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above Item Details & Specifications section and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.