Skip to main content
Need Help? Experts Available 1-888-887-6872

What are the different product conditions?

New
Brand new items. Full manufacturer warranty available. Equipment provided in manufacturer's packaging with all accessories and documentation.
New From Surplus Stock
Equipment is unused. Packaging and accessories as indicated in Stock Item Description.
Used and in Excellent Condition
Equipment is in average to above average physical condition with normal wear as indicated in Stock Item Description.
Used and in Good Condition
Equipment is in average physical condition with signs of moderate wear as indicated in Stock Item Description.
Used and in Fair Condition
Equipment is in below average physical condition and shows significant wear as indicated in Stock Item Description.
Parts Grade / As-Is
Equipment may be missing parts required to function and potential for major cosmetic damage, condition unknown, or as specified in Stock Item Description.

Teledyne / LeCroy / Catalyst PCIAX-332 Extender Board

Teledyne / LeCroy / Catalyst PCIAX-332 Extender Board

Teledyne / LeCroy / Catalyst PCIAX-332 Extender Board

Model#: PCIAX-332
Stock #:
82373-1

Expedite Available
Availability: Contact Us

Item Details & Specifications

This Teledyne / LeCroy / Catalyst PCIAX-332 Extender Board is used and in excellent condition.

Configuration:
• 3 V Key and Universal

Part Number: 384-0011-005, PCIAX-5162

View Photo of 3 V key and universal connector 82373 PCIAX532, PCIAX332

Product Family Overview

Teledyne / LeCroy / Catalyst PCIAX Extender Boards

Features
  • Less than 500 ps Propagation Delay
  • Allows HOT SWAPPING or LIVE INSERTION
  • Use Quick Switch for On / Off Operation
  • Continuous Monitoring to Eliminate Spikes

Description

The Teledyne / LeCroy / Catalyst PCIAX Extender Boards allow HOT SWAPPING or LIVE INSERTION of the Unit-Under-Test into PCI (CompactPCI for CPCI-64) bus. The “HOT SWAPPING” feature of these extenders eliminates the need for turning the PC Off and On and repeated rebooting. This feature speeds up rework, characterization, and test of Unit-Under-Test in the development phase, as well as production test. The elimination of the repeated power cycling also helps prolong the system life and the hard disc operation. These Active Extenders use a new CMOS technology (known as “Quick Switch”) for switching the signals On and Off. These switches feature a very low propagation delay, typically about 250 picoseconds, resulting in no timing degradation between the bus and the Unit-Under-Test. The switches are also bidirectional allowing the entire address range to be supported for both target and master type operation.

These Active Extender boards isolate all signals and voltages to the Unit-Under-Test, when the On-Off switch is in the Off position. All voltages are ramped down and ramped up during the power down and power up in order to eliminate any spikes. During the power down the signals to the bus become isolated as soon as the main supply, +5V, falls to +3.0V. During the power up the signals stay isolated until the main voltage is at least +3.0V.

CPCI-64 and PCIAX Rev B and higher extender boards also allow voltage margin testing of the UUT, by allowing external power supplies to replace the system power supplies as inputs to the Unit-Under-Test.

Additional Photos

Teledyne / LeCroy / Catalyst PCIAX-332 Extender Board
Teledyne / LeCroy / Catalyst PCIAX-332 Extender Board
Teledyne / LeCroy / Catalyst PCIAX-332 Extender Board
Teledyne / LeCroy / Catalyst PCIAX-332 Extender Board


Disclaimer

  • Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above Item Details & Specifications section and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.