Skip to main content
Need Help? Experts Available 1-888-887-6872

What are the different product conditions?

New
Brand new items. Full manufacturer warranty available. Equipment provided in manufacturer's packaging with all accessories and documentation.
New From Surplus Stock
Equipment is unused. Packaging and accessories as indicated in Stock Item Description.
Used and in Excellent Condition
Equipment is in average to above average physical condition with normal wear as indicated in Stock Item Description.
Used and in Good Condition
Equipment is in average physical condition with signs of moderate wear as indicated in Stock Item Description.
Used and in Fair Condition
Equipment is in below average physical condition and shows significant wear as indicated in Stock Item Description.
Parts Grade / As-Is
Equipment may be missing parts required to function and potential for major cosmetic damage, condition unknown, or as specified in Stock Item Description.

Dynamic Engineering PMC2PCI PMC to PCI Adapter / Carrier

Dynamic Engineering PMC2PCI PMC to PCI Adapter / Carrier

Dynamic Engineering PMC2PCI PMC to PCI Adapter / Carrier

Model#: PMC2PCI
Stock #:
83549-1

Expedite Available
Availability: Contact Us

Item Details & Specifications

This Dynamic Engineering PMC2PCI PMC to PCI Adapter / Carrier is used and in excellent condition.

Part Numbers: 10-2001-1203, 10-2001-1204 83549 PMC2PCI

Product Family Overview

Dynamic Engineering PMC2PCI PMC to PCI Adapter / Carrier

Features
  • Single Slot PMC Card Plus PCI Card Height on Rear
  • (1) PCI 5V or 3.3 V Slot Provided
  • PCI Bus Can Operate at 66 or 33 MHz
  • 64 or 32 Bit Operation is Supported
  • INTA, INTB, INTC, INTD Routed from PCI to PMC Connector
  • Low Power Device with No Appreciable Power Dissipation

Description

The Dynamic Engineering PMC2PCI PMC to PCI Adapter / Carrier converter card provides the ability to install a PCI card into a standard PMC slot. The PMC2PCI has two PCI card slots mounted to a PMC card. One slot can be used at a time with the choice of 3V or 5V IO and 32 or 64 bit data paths.

The PCI bus is buffered with 10 ohm series resistors and clamped with Schotky diodes. The PCI clock is distributed with a zero delay buffer. The PMC2PCI design is passive with no added delays to access the PCI hardware. The passive design reduces system delays and lowers cost.

Some PMC carriers do not supply 3.3V. The PMC2PCI has an on-board power supply which can source up to 10A at 3.3V. The regulator design has been updated to utilize a high efficiency switching regulator. The power supply can be bypassed or utilized under the control of a user shunt. The shunt options are defined in the silk-screen.

Additional Photos

Dynamic Engineering PMC2PCI PMC to PCI Adapter / Carrier
Dynamic Engineering PMC2PCI PMC to PCI Adapter / Carrier
Dynamic Engineering PMC2PCI PMC to PCI Adapter / Carrier


Disclaimer

  • Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above Item Details & Specifications section and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.