Skip to main content
Need Help? Experts Available 1-888-887-6872

What are the different product conditions?

New
Brand new items. Full manufacturer warranty available. Equipment provided in manufacturer's packaging with all accessories and documentation.
New From Surplus Stock
Equipment is unused. Packaging and accessories as indicated in Stock Item Description.
Used and in Excellent Condition
Equipment is in average to above average physical condition with normal wear as indicated in Stock Item Description.
Used and in Good Condition
Equipment is in average physical condition with signs of moderate wear as indicated in Stock Item Description.
Used and in Fair Condition
Equipment is in below average physical condition and shows significant wear as indicated in Stock Item Description.
Parts Grade / As-Is
Equipment may be missing parts required to function and potential for major cosmetic damage, condition unknown, or as specified in Stock Item Description.

Get Control E84 Serial to Parallel Controller (SPC)

Get Control E84 Serial to Parallel Controller (SPC)

Get Control E84 Serial to Parallel Controller (SPC)

Model#: E84
Stock #:
98867-1

Expedite Available
Availability: Contact Us

Item Details & Specifications

Part Number: KLA01002 98867

Product Family Overview

Get Control E84 Serial to Parallel Controller (SPC)

Features
  • Two Amp Mate-n-lock Connectors
  • Female DB-25 Connector
  • 16 Optically-Isolated Channels

Description

The GCI E84 Serial to Parallel Controller (E84 SPC) is an off-the-shelf solution used by 300mm equipment manufacturers to provide SEMI E84 compliant communications for their products. With its built-in Load and Unload algorithms it is the perfect E84 communications solution for process tools, stockers, load ports, FOUP buffers, smart storage shelves and simulation load ports.

The E84 SPC easily integrates with equipment controllers through a standard serial communications connection. All handshaking functions are performed automatically with error detection and reporting, requiring only a minimal amount of communications overhead with the equipment controller. Alternatively, the E84 SPC can be implemented as a stand-alone controller utilizing its placement and presence sensor inputs. The E84 SPC is mounted in an extruded aluminum enclosure.

Two Amp Mate-n-lock connectors (AMP P/N's 794617-2, 794617-8) are provided for all external wiring, including the RS232 interface (transmit, receive, and ground), six auxiliary inputs (for use with load port placement, presence and light curtain sensors), one auxiliary output, and system power.

A female DB-25 connector provides a fully compliant passive E84 PI/O interface to connect with the factory AMHS or optical transceiver device. It provides 16 optically-isolated E84 I/O signals plus three reserved optical transceiver signals: Select, Mode, and Go. LEDs are provided to indicate the state of each PI/O interface signal. The +24V signal is available to power an optical transceiver device.

An API consisting of a line-based ASCII message set provides the software interface to the host controller. The API provides an automatic mode of operation to perform the E84 Load and Unload handshakes with minimal host intervention. Manual mode allows the host controller to control and monitor individual PI/O signals.

The E84 SPC requires a single +18 to 30 VDC 200 mA power source.

Additional Photos

Get Control E84 Serial to Parallel Controller (SPC)
Get Control E84 Serial to Parallel Controller (SPC)
Get Control E84 Serial to Parallel Controller (SPC)


Manuals, Datasheets, Links

Disclaimer

  • Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above Item Details & Specifications section and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.