Skip to main content
Need Help? Experts Available 1-888-887-6872

What are the different product conditions?

New
Brand new items. Full manufacturer warranty available. Equipment provided in manufacturer's packaging with all accessories and documentation.
New From Surplus Stock
Equipment is unused. Packaging and accessories as indicated in Stock Item Description.
Used and in Excellent Condition
Equipment is in average to above average physical condition with normal wear as indicated in Stock Item Description.
Used and in Good Condition
Equipment is in average physical condition with signs of moderate wear as indicated in Stock Item Description.
Used and in Fair Condition
Equipment is in below average physical condition and shows significant wear as indicated in Stock Item Description.
Parts Grade / As-Is
Equipment may be missing parts required to function and potential for major cosmetic damage, condition unknown, or as specified in Stock Item Description.

Quasonix QSX-VSR-110-10S-20-6A E-TIMTER Multi-Mode Telemetry Transmitter

Quasonix QSX-VSR-110-10S-20-6A E-TIMTER Multi-Mode Telemetry Transmitter

Quasonix QSX-VSR-110-10S-20-6A E-TIMTER Multi-Mode Telemetry Transmitter

Model#: QSX-VSR-110-10S-20-6A
Stock #:
99329-1

Expedite Available
Availability: Contact Us

Item Details & Specifications

Configuration:
• Frequency Band: 2200.5 to 2389.5 MHz
• Clock and Data Interface: RS-422 - 120 ohms Differential
• PCM/FM Mode(ARTM Tier 0): Yes
• SOQPSK-TG Mode (ARTM Tier I): Yes
• Multi-H CPM Mode (ARTM Tier II): No
• RF Output Power: 10 Watts (+40 dBm Minimum)
• Package: Female MDM-15 Primary Connector, SMA Female RF Output Connector 99329 TIMTER, VSR, QSX-VSR-110-10S-20-6A, QSX-VSR, E-TIMTER

Product Family Overview

Quasonix E-TIMTER Multi-Mode Telemetry Transmitters

Features
  • (1) MDM-15 Connector for All Baseband Interfaces
  • (1) SMA Female Connector for the RF Output Connection
  • 5 W Min. RF Output Power

Description

The Quasonix E-TIMTER Multi-Mode Telemetry Transmitters are designed to transmit airborne telemetry data from a test article to ground stations. The E-TIMTER is designed to be mounted by four (4) 6-32 screws through the holes in the four corners. The E-TIMTER has two external connectors, an MDM-15 for all baseband interfaces, and an SMA female for the RF output connection. The minimum RF output power is 5 Watts (10 Watts with either Option 09 or Option 10). When the RF load VSWR is < 2:1 at all phase angles from 0 to 360 degrees. The transmitter electrical current drain does not exceed 1.8 amps (2.5 amps with either Option 09 or Option 10). The carrier frequency is selectable in 0.5 MHz steps from 2200.5 MHz to 2389.5 MHz (Sband) or 1435.5 MHz to 1534.5 MHz (L-band). The frequency error is less than ±20 ppm over all combinations of temperature, voltage, and aging (up to five years). The E-TIMTER is designed for efficient heat transfer between internal heat producing sources and the baseplate. It is rated for operation with baseplate temperatures ranging from -40°C to +85 °C, except for units with Option 09 or Option 10, which are specified to operate from -40°C to +70°C.

Additional Photos

Quasonix QSX-VSR-110-10S-20-6A E-TIMTER Multi-Mode Telemetry Transmitter
Quasonix QSX-VSR-110-10S-20-6A E-TIMTER Multi-Mode Telemetry Transmitter
Quasonix QSX-VSR-110-10S-20-6A E-TIMTER Multi-Mode Telemetry Transmitter
Quasonix QSX-VSR-110-10S-20-6A E-TIMTER Multi-Mode Telemetry Transmitter


Disclaimer

  • Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above Item Details & Specifications section and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.